> > >

Enforcer 32WE GB

32 Wireless Input Control Panel

The Enforcer is a complete two way wireless control panel using wireless devices manufactured by Pyronix Ltd.

Two way wireless technology is a vital part of the system that keeps it safe and reliable, and in turn provides a major advantage to the installer.

Each device on the Enforcer is a transmitter and a receiver, offering the installer a status reading at both the Enforcer control panel, and the wireless device.

868MHz Transceiver FM technology
Pyronix two way wireless technology
Instant two way device control (ITDC)
Signal Strength Indicator (SSI)
4 Areas
32 Wireless inputs
2 Wired inputs
3 Wired outputs (expandable to 19)
80 User codes
32 wireless keyfobs with individual user ID
In built proximity reader
750 Event log with time and date
12V Auxiliary output / back up battery time 12 hours

COMMERCIAL / RESIDENTIAL

Product Features

Features	Description
Two Way Wireless Technology	Each wireless device on the Enforcer system, including movement detectors is a transmitter and a receiver. The wireless technology used on the Enforcer system holds a significant advantage over one way and some two way wireless products currently available on the market: 1) All wireless devices know when the system is armed and disarmed. Armed: All including movement detectors are permanently awake, making the protection much more secure. Disarmed: The detection component of the movement detectors is disabled, preserving battery power. However, the detectors still communicate with the control panel via low power supervision messages. Alarm Condition: During an alarm condition each activation of the movement detectors (PIR and DT) is transmitted to the ARC and user as well as registered in the memory log. This is only possible because detectors in the Enforcer system never sleep after activated as other products from most other brands would do, therefore compromising security. 2) The Enforcer 2-way wireless system allows the implementation of the Double Knock feature for every wireless movement detector (PIRs and DTs). This feature is normally found on wired systems only and is used to reduce false alarms on difficult installations.
Instant two way Device Control (ITDC)	The ITDC technology enables instant wake up and instant sleep of each device on the system, allowing continuous communication between the control panel and wireless devices while preserving battery power. This technology not only provides installers with total control of each device, but also gives users peace of mind that they have a reliable and secure wireless system. - Ensuring that all wireless detection devices know when the system is armed and disarmed. - Ensuring that they are awake as soon as the system is armed.
Signal Strength Indicator (SSI)	One of the key advantages of implementing of the SSI technology is to allow the installer to view the wireless transmission signal strength on both the control panel and wireless devices in real time.
Pyronix High Security Wireless Device Encryption	The two way wireless protocol has been developed by Pyronix to ensure that the communication between all wireless system components is protected on a very high security level. The protocol uses the 128 BITS Pyronix advanced encryption key.
One Push To Learn	Assinging wireless devices to the system is made simple and quick by the one push to learn feature. 1. Choose an input to learn the device to 2. Remove the plastic insulator between the battery and positive contact and press LEARN button 3. Input learnt Quick, Simple and Efficient!

Bus Diagram

Technical Specification

INPUTS
Number of Wireless inputs	32
Number of wired inputds (DEOL)	2
Input current loop	1.9mA
Normal input loop timers	100 - 3000mS (programmable)
Input wire resistance	<1k5

INPUT ACTIVATION RESISTANCE (WIRED INPUTS)
Normal	3k7 or 8k3
Intruder	8k4 to 10k2
Tamper	<3k7 or >23k

INPUT / OUTPUT BOARD
Output Voltage	9-16V DC (12V Norm.)
Max. Total Current Output	1A
PGM1, STRB, BELL	Open Collector, 250mA Cont. Load
SAB / AUX Fuses	350mA, Self Resetting

DIGITAL COMMUNICATOR
Digital Communicator	Analogue
Lightning protection	6.75V/125Amps

ENVIRONMENTAL (ENFORCER)
Operating Temperature	-10
Storage Temperature	-20

DIMENSIONS / WEIGHT
Dimensions	220x160x50mm
Weight	1025g

POWER SUPPLY
Power Input	90 - 264V AC (120 - 374V DC)
Rated Current	222-75mA
Rated Frequency	50 / 60 Hz
Input Fuse Rating	T 2A (non replaceable)

WIRELESS DEVICE
Operating Voltage	3.0V nominal
Current Consumption	Communicating: 40-80mA
Communication Time	40ms
Battery Type	CR123A (KX); CR2 (MC WE); CR1/3N (KF4): ENF8XAA (Enforcer)

ENVIRONMENTAL (WIRELESS DEVICE)
Operating Temperature	-10
Storage Temperature	-40

Accessories

Product	Description	Product	Description
KF4 WE	Two Way Wireless Keyfob	KX12DQ WE	Two Way Wirless 12m Digital PIR
KX10DP WE	KX wireless 10m pet immune PIR	MC1 WE	Two Way Wireless magnetic contact / universal transmitter with 1 reed / 1 input + tamper input
MC2 WE	Two Way Wireless magnetic contact / universal transmitter with 2 reed / 1 input + tamper input	SHOCK WE	Two Way Wireless Shock Sensor
SMOKE WE	Two Way Wireless Smoke Sensor	CO WE	Two Way Wireless Carbon Monoxide Sensor (coming soon)
WL-WE	Two Way Water Leak Sensor (coming soon)	DELTABELL WE	Two Way Wireless external siren.
DIGI-1200	Digital Communicator	Batteries	Replacement Batteries for the wireless devices