- Dual element pyro-electric sensor
- Selectable EOL (End Of Line) resistors
- Blue wave technology
- Auto sensitivity feature
- Digital temperature compensation
- Tamper proof brackets included
- Sealed optics
- ABS plastics
- Tested and Certified to EN50131-2-2
Product Features
| Features | Description |
| 15m Volumetric detector | 15m Volumetric detection coverage. Ideal for protection of rooms, offices etc. |
| Selectable EOL resistors | The detectors incorporates selectable alarm resistor values of 6K8, 5K6, 4K7 &1K & tamper values of 5K6, 4K7, 2K2 and 1K catering for most control panels on the market. |
| Blue wave technology | This technology further enhances the detector’s immunity to infra-red noise in the environment. BWT comprises of 2 key components: 1). The new 3D optics system enables perfect focusing of the infra-red signal onto the pyro-electric sensor. This allows BWT to clearly identify the positive and negative signal edges. 2). Powerful software embedded into a microprocessor is used to process the received information from the pyro-electric sensor. The result of this combination is lower infra-red signal noise amplification and therefore better immunity. |
| Auto sensitivity feature | Depending on the environment condition, the detector will automatically adjust the sensitivity |
| Digital Temperature Compensation | When the product is used in a hot environment this technology digitally adjusts the detector’s sensitivity allowing it to maintain its range even when the background room temperature is almost equal to the external body temperature of 32ºC (internal body temperature = 37ºC) |
| Tamper proof brackets | Supplied with both wall & ceiling mount brackets which provides access for up to two 8 core cables (Tamper kit optional) |
| Sealed optics | Protects from possible infestation from insects, shields air movement in front of the pyro-electric sensor and protects against adverse reflections from inside the detector housing. |
| ABS plastics | 3mm polished finish, reduces electrostatic interference on the PIR sensor. |
Lens Coverage (click image to enlarge)
KX15DQ |
Technical Specification
| ELECTRICAL | |
| Operating voltage | 9-16VDC (12V nominal) |
| Current consumption - no alarm | 12mA (12V nominal) |
| Current consumption - alarm | 11mA (12V nominal) |
| Relay | Solid state |
| Relay output | 60VDC, 50mA Protected |
| Tamper switch | 12V max, 50mA max |
| RFI immunity to continuous wave (CW) 80-2000MHz | 75 V/m |
| RFI immunity to amplitude modulation (AM) 80-2000MHz | 25 V/m |
| RFI immunity to pulse modulation (PM) 80-2000MHz | 25 V/m |
| OPERATING FEATURES | |
| Alarm period of | 2.5 seconds |
| Detection speed | 0.3 - 3m/s |
| Operating temperature | -30 |
| Storage temperature | -40 |
| OPTICAL | |
| White light filter | 6500 Lux |
| Optics | Sealed |
| Lens | 3 Dimensional |
| Protection | Ultraviolet Light Filter |
| MOUNTING | |
| Optimum coverage height | 1.8-2.4m |
Information
| COMPLIANCE (click image to download certificate) | |
| CE |  |
| Denmark |  |
| EN Europe |  |
| Finland |  |
| Netherlands |  |
| Norway |  |
| Russia |  |
| PACKING INFORMATION | |
| Min Pack | 10 |
| Warranty | 5 years |
| Designed | UK |
- Control Panels: Wireless
- Control Panels: PCX
- Control Panels: Matrix
- Control Panels: Sterling
- Detectors: Confirmed
- Detectors: Anti Mask
- Detectors: Dual Tech
- Detectors: KX Analogue PIR
- Detectors: KX Digital PIR
- KX15DD (Grade 2)
- KX15DQ (Grade 2)
- KX18DC (Grade 2)
- Detectors: Ceiling PIR
- Detectors: Analogue PIR
- Detectors: Pet Immune
- Detectors: External
- Detectors: Breakglass
- External Sounders
- Speech Diallers
- IP Communication
- Network
- IP Monitoring
- Accessories
.png)
