Can be used as entry control
Green and red LEDs indicate system status when valid tag/card is presented
IP65 rated external proximity reader
Wires directly to the RS-485 BUS
Proximity tag or card reader
Switched negative for relay magnetic lock control
Can be used to set/unset (arm/disarm) controller
Complies with EN50131-1
Product Codes & Options
Can be used with either proximity tags or cards to easily set/unset the system. Green and red LEDs indicate system status when a valid tag/card is presented.
Can be used for internal or external doors to deny unauthorised entry.
Need a reader to both act as a set point and access control? Entry control solves this, combining both from a single reader; using the same Pyronix proximity tags used to set and unset the system.
Rated IP65, the weatherproof external proximity reader does not need to be positioned under cover therefore can be used on any external entry.
EN 50131–1:2006+A1:2009 | EN 50131–3:2009 | EN50131–6:2008 | PD6662:2010
Euro Accessories - CE Declaration of Conformity - PYR023
EURO-PROXE - Declaration of Conformity
Intergrated prox reader
IP 64 rated external prox reader
Onboard wired inputs
Outputs on board
Certified operating temperature
-10 to +50C
Nominal operating temperature
Physical dimensions (H x W x D)
85 x 85 x 21mm
13.8V (9-16V range)
Max. 90mA @ 13.8V
EN50131-1 | PD6662
External Proximity Reader - Installation Guide
PCX-PROX/EXT - Mounting Template - English - RINS913-1
Download manuals and InSite UDL.